SVSi | Scientific Vision Systems

SVSi is the leading supplier of scientific medical equipment including medical cameras,
Endoscopy, Ultrasound, Medicapture, and medical printers, from top brand names as
Sony, Hitachi, Panasonic, Tatung, and Mitsubishi, among others.

CSB1100F

1.3 Mega Pixel CMOS B/W Video Camera
with IEEE1394 Interface

Key Features

IEEE1394 output
Ultra-high resolution 1280 (H) x 1024 (V)
Various shutter modes including:
• Global shutter - all pixels simultaniously exposed
• Random Trigger Shutter (RTS)

CSB1100F

WOI-function
Up to 16 arbitrary rectangular areas (region of interest)
can be read out with increase frame rate
Multi Slope
It is possible to make the slope position change by setting an internal register,
and to set it to the dynamic range matched to the brightness of subject
High dynamic range
By adjustable sensitivity characteristic
Application
• Machine vision
• Factory automation
• Quality control

Specifications

CSB1100F
Image sensor	CMOS image sensor
Total pixels	1280 (H) x 1024 (V)
Active pixels	1240 (H) x 1024 (V)
Pixel size	6.7 (H) x 6.7 (V) µm
Image area	8.308 x 6.854 mm
Driving frequency	39.3216 MHz
Scanning line	1024 lines
Frame rate	16 fps
Sync system	Internal
Aspect ratio	5:4
Video output	IEEE1394 Std. 1394a-2000, transfer rate 400 Mbps
WOI-function	Output of up to 16 WOI with increased frame rate
Protocol	IIDC 1394 Version 1.3
Signal/Noise ratio	>50dB
Input signal	TRIG (Shutter Trigger) 3.3V CMOS level
Grabbing timing	Falling edge detection
Pulse width	Minimum: 1µs Max: no limit
Gamma	1.0
Electronic shutter	Shutter speed (preset inside the camera) selection via communication command. 1 through 4000 (approx. 62.5µs through 1s
Shutter mode	Global shutter
Random Trigger Shutter	RTS operation is available by external trigger input. Shutter speed preset or shutter speed control by pulse width is available.
Mode 0	Shutter speed preset mode (preset inside the camera).
Mode 1	Shutter speed can be controlled via shutter trigger pulse width. The camera starts light-exposure at the falling edge timing and ends it at the rising edge timing.
Power supply	8 VDC - 30 VDC via IEEE connector
Power consumption	Approx. 150mA (DC 12V)
Operating ambient condition	Performance guaranteed	Temperature from 0 to 40°C / Humidity from 20 to 80% (no condensation)
	Operating guaranteed	Temperature from -5°C to 45°C / Humidity from 20 to 80% (no condensation)
	Preservation	Temperature from -20°C to 60°C / Humidity from 20 to 95% (no condensation)
Mechanical spec	Lens mount	C-Mount
	Dimension	44mm (W) x 29mm (H) x 52mm (D)
	Weight	Approx. 120g
Accessories	IEEE1394 cable Tripod mounting kit