DVO-1000MD
Specifications
Power Requirements: AC 100 V to 240 V, 50/60 Hz
Power Consumption: 35 W
Operating Temperature: +5 to +40°C
Storage Temperature: -20 to +60°C
Operating Humidity: 20 to 80%
Dimensions: 212 x 128.5 x 382 cm (8 3/8 x 5 x 15 inches)
Mass: 6 kg (13 lb 4 oz)
Recording System: DVD Recording, NTSC/PAL Switchable
Recording Format: Video: MPEG-2 compression
Audio: Dolby Digital format
Recordable Media: DVD+RW (2.4x and 4x speed)
Recording Time: HQ Mode: 60 minutes
SP Mode: 120 minutes
LP Mode: 180 minutes
Medical Standards: EN60601-1, EN60601-1-2, UL60601-1, CSA C22.2 No.60601.1
Input/Output
Analog Composite Input: BNC x2, with loop-through, unbalanced, 1.0 Vp-p, 75ohm S-Video Input: 4-pin DIN x2, with loop-through Y: 1 Vp-p, 75ohm
Unbalanced C: 0.286 Vp-p (NTSC)/0.3 Vp-p (PAL), 75ohm, unbalanced
Analog Composite Output: BNC x1, 1±0.2 Vp-p, 75 ohm, unbalanced
S-Video Output: 4-pin DIN x1 Y: 1.0 Vp-p, 75 ?, unbalanced
C: 0.286 Vp-p (NTSC)/0.3 Vp-p (PAL), 75 ?, unbalanced
Analog Audio Input: RCA Pin x2 (L/R), 2 Vrms (full bit), input impedance 47 k?
Analog Audio Output: RCA Pin x2 (L/R), 2 Vrms (full bit), load impedance 47 k?
Monitor Audio Output: Monitor RCA Pin x1, 2 Vrms (full bit), load impedance 47 k?
i.LINK (DV IN): i.LINK 6-pin x1, IEEE1394
Remote Control: RS-232C x1, D-sub 9-pin
Remote1 x1, stereo mini jack (for connection with the optional
SVRM-100A/DSRM-10 controllers)
Remote2 x1, stereo mini jack (for connection with the optional FS-20 foot switch)
USB 2.0 x1 (Full Speed)
Supplied Accessories:
Operation Manual, Protocol Manual
DSRM-10
Remote Control Unit
SVRM-100A
Remote Control Unit
FS-20
Foot Switch
VMC-IL4615B/IL4435B
i.LINK cable (6-pin to 4-pin)
VMC-IL6615B/IL6635B
i.LINK cable (6-pin to 6-pin)
|
