3CCD Color Camera (NTSC) version
The Toshiba IK-TF2 is well suited for color image processing and high speed machine vision. The Co-Site Sampling (spatial congruent) arrangement of the 3 CCD's captures accurate computer ready color images.
|
- RS-232 Serial Interface
- One or Two Pulse Random
- Trigger
- RGB Output
- Lightweight (5.47oz)
|
Specifications:
| Pick Up System |
3CCD, RGB Micro Prism System |
| Image Sensor |
1/3-inch I 410,000 pixel IT-CCD |
| Effective Pixels |
768 H x 494V |
| Scanning System |
.2:1 Interlaced |
| Scan Frequency |
Horizontal: 15.734 kHz
Vertical: 59.94 Hz |
| Sync System |
Internal/External (Automatic Switching) |
| Resolution |
570 horizontal Television Lines |
| Sensitivity |
Minimum 10 lux (F2.2, +18dB Gain up)
Normal: 2000 lux (F8) |
| Signal-to-Noise Ratio |
64 dB |
| Lens Mount |
C-Mount (Flange back focal length 17.526 mm) |
| Ambient Operating Temperature |
0-40 C (32-104 F) |
| Ambient Humidity |
< 90% Relative |
| White Balance Modes |
AWB (Auto White balance) 3200k/5600k selectable
MANU (Manual White) |
| Gain Modes |
OFF
MANU (Gain control in 1dB steps from -3 to 18dB) |
| Electronic Shutter Modes |
MANU (Manual Shutter, 1/60 to 1/50,000 sec)
Synchro Scan |
| Output Signals |
RGB: 75 Ohm Unbalanced, D-Sub 15 pin connector |
| External Sync Output |
HD or VD: 2-5V (p-p) Negative 75 ohm at termination
RS: L level <0.4V, H Level 3.4-5V |
| Sync Signal Output |
Sync: 2.5V 0.5V (p-p) Negative 75 Ohm Unbalanced
HD or VD: 4.0-5.5V (p-p) Negative,
Video index, 4.0-5.5V (p-p) Negative |
| Random Trigger |
1 pulse sync non reset; 1 pulse sync reset, 2 pulses (rising edge/falling edge, Width selectable) |
| Remote Control Interface |
Serial Data Interface (RS-232C) |
| Dimensions (WxHxD) |
44mm (W) x 44mm (H) x 78mm (D),
1.7 (W) x 1.7 (H) x 3.1 (L) inch |
| Power Requirement |
12V DC 10% |
| Power Consumption |
3.6 W |
| Standard |
FCC class A, CE |
| Weight |
5.47 oz. (155g) |
|
